Printed circuit boards

Tekube, thanks to its experience in the electronic production sector and the consolidated network of production partners, is capable of satisfying a wide range of technological needs. Our offer includes the following technologies:

Single-side/Double-sided
Multilayer 4+
HDI
Aluminium based
Flex/Rigid-flex
Teflon
Coin

With regard to PCB production, our products comply with IPC-A-600G, ISO/ QS9000, TM650, TS16949: 2009, IATF 16949: 2016, and RoHS, REACH and Halogen Free directives.

PCB | Technologies

DOUBLE-SIDED

Double-sided PCBs

MULTILAYER

Multilayer PCBs

HDI

High Density Interconnect PCBs

ALUMINIUM BASE

Aluminium based PCBs

FLEX

Flexible PCBs

RIGID-FLEX

Rigid-flex PCBs

TEFLON + FR4

Teflon and FR4 PCBs

ANALOG CIRCUITS

FR4 PCBs

Pass through hole
minimum board thickness 100 μm
aspect ratio PTH = 1:6 o 1:10

Microvia
Minimum diameter 75 μm (laser drilling)
Aspect Ratio blind hole = 1

Fine line
minimum width trace/isolation 50 μm
tolerance ±10%

Layer number
standard up to 12,
over 12 upon request
(engineering approval needed)

Minimum Inner layer thickness
50 µm, with 9 µm copper

Minimum Prepreg thickness
50 µm (1 x 106)

Minimum Kapton thickness
50 µm, 25 µm upon request

SolderMask/SolderDam
120 μm standard
e 70 μm upon request

Maximum PCB thickness
6.5 mm